1192A non-paired - four-conductor star quad, low-impedance cable for more information please call 1-800-belden1 see put-ups and colors description: 24 awg stranded (42x40) high-conductivity bare copper conductors, polyethylene insulation, tinned copper braid shield (95% coverage), pvc jacket. physical characteristics: conductor: number of conductors 4 total number of conductors 4 awg 24 stranding 42x40 conductor diameter .024 in. conductor material sbc - soft bare copper insulation: insulation material pe - polyethylene nom. insulation wall thickness .016 in. insulation diameter .056 in. overall cabling: overall cabling color code chart : number color 1 blue 2 white number color 3 blue w/white stripe 4 white w/blue stripe outer shield: outer shield type braid outer shield material tc - tinned copper outer shield %coverage 95 % outer jacket: outer jacket material pvc - polyvinyl chloride outer jacket nominal wall thickness .045 in. overall nominal diameter: overall nominal diameter .245 in. mechanical characteristics: page 1 of 3
1192A non-paired - four-conductor star quad, low-impedance cable operating temperature range -30c to +75c non-ul temperature rating 75c bulk cable weight 33 lbs/1000 ft. max. recommended pulling tension 21 lbs. min. bend radius (install) 2.45 in. applicable specifications and agency compliance: applicable standards: eu ce mark (y/n) yes eu rohs compliant (y/n) yes eu rohs compliance date (mm/dd/yyyy): 01/01/2004 plenum/non-plenum: plenum (y/n) n electrical characteristics: nom. characteristic impedance 40 ohms nom. inductance .21 h/ft nom. capacitance conductor to conductor @ 1 khz 39.2 pf/ft nom. cap. between cond. in a quad config. @ 1 khz 57.4 pf/ft nominal velocity of propagation 66 % nom. conductor dc resistance @ 20 deg. c 26.6 ohms/1000 ft nominal outer shield dc resistance @ 20 deg. c 7.1 ohms/1000 ft max. operating voltage - ul 100 v rms max. operating voltage - other : other voltage description 18.0 kv nom. breakdown voltage between conductors 16.9 kv nom. breakdown voltage conductors to shield max. recommended current 2.9 amps per conductor @ 25c other electrical characteristic 1 2/c 21 awg equivalent dcr when connected to a 3-pin xlr notes: notes quad connection scheme: the two blue wires (or wires directly opposite one another) are connected together to form one conductor, and similarly the two white wires (or remaining wires) are connected together to form the second conductor. put-ups and colors: item description put-up (ft.) ship weight (lbs.) jacket color notes 1192A b59100 4 #24 pe sh pvc blk mtt 100 3.3 black, matte 1192A b591000 4 #24 pe sh pvc blk mtt 1000 37 black, matte c 1192A b59500 4 #24 pe sh pvc blk mtt 500 16.5 black, matte c page 2 of 3
1192A non-paired - four-conductor star quad, low-impedance cable 1192A g7v1000 4 #24 pe sh pvc red mtt 1000 37 red, matte c 1192A g7w1000 4 #24 pe sh pvc grn mtt 1000 37 green, matte c 1192A g7x1000 4 #24 pe sh pvc blu mtt 1000 37 blue, matte c 1192A g7x500 4 #24 pe sh pvc blu mtt 500 16.5 blue, matte 1192A g8m1000 4 #24 pe sh pvc yel mtt 1000 37 yellow, matte 1192A u901000 4 #24 pe sh pvc gry mtt 1000 37 gray, matte c c = crate reel put-up. revision number: 1 revision date: 07-27-2005 ? copyright 2006 belden, inc all rights reserved. although belden ("belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. belden provides the information and specifications herein on an "as is" basis, with no representations or warranties, whether express, statutory or implied. in no event will belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. all sales of belden products are subject to belden's standard terms and conditions of sale. belden believes this product to be in compliance with the following environmental regulations: california proposition 65 consent judgment for wire & cable mfgs.(san francisco superior court nos. 312962 and 320342); eu rohs (directive 2002/95/ec, 27-jan- 2003);material manufactured prior to the compliance date may still be in stock at belden facilities and in our distributor's inventory. eu elv (directive 2000/53/ec, 18-sept-2000); eu weee (directive 2002/96/ec, 27-jan-2003); and eu bfr (directive 2003/11/ec, 6-feb- 2003). the information provided in this product disclosure, and the identification of materials listed as reportable or restricted within the product disclosure, is correct to the best of belden's knowledge, information and belief at the date of its publication. the information provided in the product disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. this product disclosure is not to be considered a warranty or quality specification. regulatory information is for guidance purposes only. product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. belden declares this product to be in compliance with eu lvd (low voltage directive 73/23/eec), as amended by directive 93/68/eec. page 3 of 3
|
